use u-boot-kuk

conf/machine/trizeps8mini.conf

@@ -5,16 +5,12 @@
 #@MAINTAINER: Jun Zhu <junzhu@nxp.com>
 
 MACHINEOVERRIDES = "mx8:mx8m:"
-#MACHINEOVERRIDES =. "imx-boot-container:mx8:mx8m:mx8mm:"
 
-#require include/imx8mm-evk.inc
-#require conf/machine/include/imx8mm-evk.inc
 require conf/machine/include/imx-base.inc
 require conf/machine/include/tune-cortexa53.inc
 
 #PREFERRED_PROVIDER_virtual/kernel = "linux-kuk"
 PREFERRED_PROVIDER_virtual/kernel_mx8 = "linux-kuk"
-#IMX_DEFAULT_KERNEL  = "linux-kuk"
 
 KERNEL_DEVICETREE =  "keithkoep/kuk-trizeps8mini-ipant7.dtb"
 KERNEL_DEVICETREE += "keithkoep/kuk-trizeps8mini-ipant7_v2.dtb"
@@ -23,7 +19,7 @@ KERNEL_DEVICETREE += "keithkoep/kuk-trizeps8mini-ipant7.dtb"
 
 
 #PREFERRED_PROVIDER_virtual/bootloader = "u-boot-kuk"
-#PREFERRED_PROVIDER_virtual/bootloader_mx8 = "u-boot-kuk"
+PREFERRED_PROVIDER_virtual/bootloader_mx8 = "u-boot-kuk"
 
 #UBOOT_MAKE_TARGET = "all"
 #UBOOT_CONFIG_BASENAME = "imx8mm_evk"
@@ -34,14 +30,18 @@ KERNEL_DEVICETREE += "keithkoep/kuk-trizeps8mini-ipant7.dtb"
 
 
 UBOOT_SUFFIX = "bin"
-#UBOOT_CONFIG_BASENAME = "trizeps8mini"
-UBOOT_CONFIG_BASENAME = "imx8mm_evk"
+UBOOT_CONFIG_BASENAME = "trizeps8mini"
+#UBOOT_CONFIG_BASENAME = "imx8mm_evk"
 UBOOT_CONFIG ??= "sd"
 UBOOT_CONFIG[sd]       = "${UBOOT_CONFIG_BASENAME}_defconfig,sdcard"
 UBOOT_CONFIG[mfgtool]  = "${UBOOT_CONFIG_BASENAME}_defconfig"
+#UBOOT_CONFIG[fspi]     = "${UBOOT_CONFIG_BASENAME}_fspi_defconfig"
 #UBOOT_MACHINE = "imx8mm_evk"
 
-UBOOT_DTB_NAME = "imx8mm-evk.dtb"
+#LOADADDR = ""
+#UBOOT_DTB_NAME = "imx8mm-evk.dtb"
+UBOOT_DTB_NAME = "kuk-trizeps8mini.dtb"
+#UBOOT_DTB_NAME = "u-boot.dtb"
 SPL_BINARY = "spl/u-boot-spl.bin"
 UBOOT_MAKE_TARGET = "all"
 IMX_BOOT_SEEK = "33"
@@ -61,4 +61,8 @@ ATF_PLATFORM = "imx8mm"
 PLATFORM = "imx8mm"
 ATF_MACHINE_NAME = "bl31-imx8mm.bin"
 SOC_TARGET = "iMX8MM"
-IMXBOOT_TARGETS = "flash_spl_uboot"
+#IMXBOOT_TARGETS = "flash_spl_uboot"
+IMXBOOT_TARGETS = "flash_evk"
+
+OPTEE_BIN_EXT = "8mm"
+TEE_LOAD_ADDR = "0xbe000000"